{"title":"Flo-Master XP2","description":"\u003cp\u003eWe carry the Aqua-Flo Flo-Master XP2 series hot tub pumps by Gecko, and genuine service parts, including the XP2 pump rebuild kits for the various models, are available in stock.\u003c\/p\u003e","products":[{"product_id":"pump-drain-plug-hose-barb-adaptor","title":"Pump Drain Plug Hose Barb Adaptor","description":"\u003cp\u003eThe hot tub pump drain plug barbed hose adaptor fits Waterway (2024 and older), Balboa and Aqua-Flo brand hot tub pump wet ends to attach a 3\/8\" clear house to the face. Some manufacturers glue the fittings into place so they cannot be transferred when replacing the pump. If this is the case, purchase new barb fitting(s) as required for the configuration of your spa.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWaterway part number 672-4350\u003c\/li\u003e\n\u003cli\u003eBarb Fitting, 3\/8in. Barb x 1\/4in. Mpt.\u003c\/li\u003e\n\u003cli\u003e1 or 2 barb fittings per pump are sometimes used by hot tub manufacturers in place of pump drain plugs.\u003c\/li\u003e\n\u003cli\u003eDoes not include o-ring. Use the o-ring from the new drain plug you are replacing, or purchase separately. Part # 805-0112\u003c\/li\u003e\n\u003cli\u003eMade in the USA by Waterway Plastics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWaterway Iron Might pumps\u003c\/li\u003e\n\u003cli\u003eBalboa pumps\u003c\/li\u003e\n\u003cli\u003eAqua-flo pumps\u003c\/li\u003e\n\u003cli\u003eLX Pumps\u003c\/li\u003e\n\u003cli\u003eWaterway Executive 48 and 56 pumps made in 2024 and earlier\u003c\/li\u003e\n\u003cli\u003eWaterway Viper pumps made in 2024 and earlier\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eWaterway has changed the threads of some of their pumps slightly for 2025, if you have a 2025 or newer Waterway Executive 48, Executive 56, or Viper pump you will require part number \u003cspan style=\"color: #0000ff;\"\u003e\u003ca style=\"color: #0000ff;\" href=\"413-1201\" target=\"_blank\" rel=\"noopener\"\u003e413-1201\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant.\u003c\/strong\u003e \u003cbr\u003eDo not to over-tighten, barb fittings will break off at the threads if too much force is applied as the material is softer than what the wet end is made of.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":44012194299973,"sku":"672-4350","price":5.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/1134\/2405\/files\/672_4350__69385.1643132097.600.600.jpg?v=1763588625"},{"product_id":"aqua-flo-xp2-spa-pump-4-5hp-230v-2-intake-discharge","title":"Aqua-Flo XP2 Spa Pump 4.5HP 230V, 2\" intake-discharge","description":"\u003cp\u003eAqua Flo XP2 series hot tub pump rated at 4.5HP or 3.0 OP.HP* featuring a 48 frame motor with 2 speeds, high speed 3450 RPMs and low speed at 1725 RPMs. Rated for 11.5 amps on high speed this is the highest performance rate pump in the XP2 line up.\u003c\/p\u003e\n\u003cp\u003eDetails:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXP2 series\u003c\/li\u003e\n\u003cli\u003e4.5HP, OP.HP 3.0\u003c\/li\u003e\n\u003cli\u003eGPM 200, High speed\u003c\/li\u003e\n\u003cli\u003e11.5 amps high\u003c\/li\u003e\n\u003cli\u003e3.3 amps low\u003c\/li\u003e\n\u003cli\u003e220 - 240 volts\u003c\/li\u003e\n\u003cli\u003e2\" intake and discharge (Measures 3\" OD across)\u003c\/li\u003e\n\u003cli\u003eIncludes 2 unions with o-rings\u003c\/li\u003e\n\u003cli\u003e48 frame motor\u003c\/li\u003e\n\u003cli\u003eDual speed\u003c\/li\u003e\n\u003cli\u003eNew cord not included, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis pump was also sold labels as a:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4.0 HP \"SPL\" Using an Emerson Motor # T55CXBMM-986 \u003c\/li\u003e\n\u003cli\u003e3.6 HP \"SPL\" Using an Emerson Motor # T55CXBZY-1162\u003c\/li\u003e\n\u003cli\u003e4.8 HP \"SPL\" Using an Emerson Motor # T55CXCAS-1179 and Century Motor 184834002\u003c\/li\u003e\n\u003cli\u003e5.0 HP \"SPL\" Using an Emerson Motor # T55CXBNC-999\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompatible replacement for the following models known as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e06630394-2, 06630489-2, 01562-35 (Sold as 5.0HP)\u003c\/li\u003e\n\u003cli\u003e06130310, 06130395-2040, 01562-88 (Sold as 3.5HP)\u003c\/li\u003e\n\u003cli\u003e07830707-2, 0780306-2, 06130308-2\u003c\/li\u003e\n\u003cli\u003e0730306-1. 06630397, 06625321-2\u003c\/li\u003e\n\u003cli\u003e06630309-2, 06530500-20, 06630500-2\u003c\/li\u003e\n\u003cli\u003e06630485-2, 06620001-2, X321000\u003c\/li\u003e\n\u003cli\u003e06625892-2, 07726008-5, X320420\u003c\/li\u003e\n\u003cli\u003e06626080, 05625387-2, X320450\u003c\/li\u003e\n\u003cli\u003e06630397-2, 06530794-2, 05652287-1\u003c\/li\u003e\n\u003cli\u003e066304450-2, 06625685-2, 05625894-1\u003c\/li\u003e\n\u003cli\u003e01562-35...\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*OP.HP stands for operational horse power and is a notation specific to Aqua-flo. \u003c\/p\u003e","brand":"Aqua Flo by Gecko","offers":[{"title":"Default Title","offer_id":44012204163141,"sku":"06130395-2040","price":751.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/1134\/2405\/files\/XP2-Pump-Pool-and-HOt-Tub-Depot__61919.1629142966.600.600.jpg?v=1763588769"},{"product_id":"aqua-flo-flo-master-xp2-2-5hp-230v-2-intake-discharge","title":"Aqua-Flo, Flo-Master XP2 2.5hp 230V, 2\" intake - discharge","description":"\u003cp\u003eAqua Flo, Flo-Master XP2 by Gecko 48 frame 2.5 OP.HP hot tub pump featuring 2 speeds and runs on 220 - 240 volts.\u003c\/p\u003e\n\u003cp\u003eDetails:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOP.HP 2.5\u003c\/li\u003e\n\u003cli\u003eHi-Flow GPM 180\u003c\/li\u003e\n\u003cli\u003e10.0 amps high\u003c\/li\u003e\n\u003cli\u003e2.6 amps low\u003c\/li\u003e\n\u003cli\u003e220 - 240 volts\u003c\/li\u003e\n\u003cli\u003e2\" intake and discharge ( measures about 3\" across OD)\u003c\/li\u003e\n\u003cli\u003e48 frame motor\u003c\/li\u003e\n\u003cli\u003eDual speed\u003c\/li\u003e\n\u003cli\u003eNew cord not included, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOP.HP stands for operational horse power and is a notation specific to Aqua-flo. If you replace an Aqua-flo pump, make sure the OP.HP rating matches the hp rating on the old pump.\u003c\/p\u003e","brand":"Aqua Flo by Gecko","offers":[{"title":"Default Title","offer_id":44012204359749,"sku":"06125000-1040","price":704.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/1134\/2405\/files\/XP2-Pump-Pool-and-HOt-Tub-Depot__52699.1633361780.600.600.jpg?v=1763588773"},{"product_id":"aqua-flo-flo-master-xp2-3-0hp-230v-2-intake-discharge","title":"Aqua-Flo, Flo-Master XP2 3.0hp 230V, 2\" intake - discharge","description":"\u003cp\u003eAqua Flo XP2 by Gecko hot tub pump with the 48 frame 2 speed motor rated for 8.4 amps on high speed and 3.0 amps for low speed running on 230 volts. Intake and discharge are 2\" (measures 3\" across OD).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3.0HP, OP.HP 2.0\u003c\/li\u003e\n\u003cli\u003eHi-Flow GPM 150\u003c\/li\u003e\n\u003cli\u003e8.4 amps high\u003c\/li\u003e\n\u003cli\u003e3.0 amps\u003c\/li\u003e\n\u003cli\u003e230 volts\u003c\/li\u003e\n\u003cli\u003e2\" intake and discharge\u003c\/li\u003e\n\u003cli\u003e48 frame motor\u003c\/li\u003e\n\u003cli\u003eDual speed\u003c\/li\u003e\n\u003cli\u003eNew cord not included, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eOP.HP stands for operational horse power and is a notation specific to Aqua-flo. \u003c\/p\u003e","brand":"Aqua Flo by Gecko","offers":[{"title":"Default Title","offer_id":44012204556357,"sku":"06120500-2040","price":667.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/1134\/2405\/files\/XP2-Pump-Pool-and-HOt-Tub-Depot__64503.1635862960.600.600.jpg?v=1763588775"},{"product_id":"aqua-flo-flo-master-xp2-2-0hp-230v-2-intake-discharge","title":"Aqua-Flo, Flo-Master XP2 2.0hp 230V, 2\" intake - discharge","description":"\u003cp\u003e\u003cspan\u003eAqua-Flo Flo-Master 48 frame hot tub pump featuring 2 speeds, low speed at 1725 RPMs and high speed at 3450 RPMs with standard 2\" intake and discharge plumbing connections.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2.0HP, OP.HP 1.5\u003c\/li\u003e\n\u003cli\u003eHi-Flow GPM 125\u003c\/li\u003e\n\u003cli\u003e7.7 amps high\u003c\/li\u003e\n\u003cli\u003e2.3 amps low\u003c\/li\u003e\n\u003cli\u003e220 - 240 Volts\u003c\/li\u003e\n\u003cli\u003e2\" intake and discharge (Measures 3\" across OD)\u003c\/li\u003e\n\u003cli\u003e48 frame motor\u003c\/li\u003e\n\u003cli\u003eDual speed\u003c\/li\u003e\n\u003cli\u003eNew cord not included, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct Note:\u003c\/strong\u003e\u003cbr\u003eOP.HP stands for operational horse power and is a notation specific to Aqua-flo. If you replace an Aqua-flo pump, make sure the OP.HP rating matches the hp rating on the old pump.\u003c\/p\u003e","brand":"Aqua Flo by Gecko","offers":[{"title":"Default Title","offer_id":44012204785733,"sku":"06115517-2040","price":643.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/1134\/2405\/files\/XP2-Pump-Pool-and-HOt-Tub-Depot__99840.1627999020.600.600.jpg?v=1763588778"},{"product_id":"aqua-flo-flo-master-xp2-2-0hp-115v-2-intake-discharge","title":"Aqua-Flo, Flo-Master XP2 2.0hp 115V, 2\" intake - discharge","description":"\u003cp\u003eThe Aqua-Flo XP2 pump model 06115000 is a 115 volt pump used in many smaller spas and hot tubs that are plug in or direct wire. This is also a compatible replacement for the many older model pumps listed below and will fit in the same foot print in the spa.\u003c\/p\u003e\n\n\u003cp\u003ePump Details:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2.0HP, OP.HP 1.5\u003c\/li\u003e\n\u003cli\u003eHi-Flow GPM 125\u003c\/li\u003e\n\u003cli\u003e14.4 amps high\u003c\/li\u003e\n\u003cli\u003e5.5 amps low\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #ff0000;\"\u003e115 Volts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e2\" intake and discharge (Measures 3\" across outside of threads)\u003c\/li\u003e\n\u003cli\u003e48 frame motor\u003c\/li\u003e\n\u003cli\u003eDual speed\u003c\/li\u003e\n\u003cli\u003eCord not included \u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAlso a replacement for the following older pumps:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e06615686-2\u003c\/li\u003e\n\u003cli\u003e06115\u003c\/li\u003e\n\u003cli\u003e1-00-0133\u003c\/li\u003e\n\u003cli\u003e06615686-2\u003c\/li\u003e\n\u003cli\u003e06115484-2\u003c\/li\u003e\n\u003cli\u003e06115452-2\u003c\/li\u003e\n\u003cli\u003e06615763-1\u003c\/li\u003e\n\u003cli\u003e06115511-2\u003c\/li\u003e\n\u003cli\u003e06117849-1\u003c\/li\u003e\n\u003cli\u003e06117849-1\u003c\/li\u003e\n\u003cli\u003e06115733-1\u003c\/li\u003e\n\u003cli\u003e06115185-1\u003c\/li\u003e\n\u003cli\u003e06615686-2\u003c\/li\u003e\n\u003cli\u003e06615452-2\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cul\u003e\n\u003cli\u003e06615607-1\u003c\/li\u003e\n\u003cli\u003e06615456-2\u003c\/li\u003e\n\u003cli\u003e06614510-2 (1.75 HP)\u003c\/li\u003e\n\u003cli\u003e630-6087\u003c\/li\u003e\n\u003cli\u003e06118371-2 (Sold as 3.0 HP)\u003c\/li\u003e\n\u003cli\u003e06610510-2\u003c\/li\u003e\n\u003cli\u003eWaveMaster 6000 (72201)\u003c\/li\u003e\n\u003cli\u003eWaveMaster 7000 (71699 120V Version)\u003c\/li\u003e\n\u003cli\u003eCaldera - Relia-Flo Jet Pump (39583)\u003c\/li\u003e\n\u003cli\u003eWaveMaker 5000 (36745)\u003c\/li\u003e\n\u003cli\u003e05615007-02\u003c\/li\u003e\n\u003cli\u003e06610002-5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eCaldera - Relia-Flo Jet Pump\u003c\/li\u003e\n\u003cli\u003ePRC9121AX\u003c\/li\u003e\n\u003cli\u003e06615429-2 (6500-122) Sundance\u003c\/li\u003e\n\u003cli\u003e06115007-5 \u003c\/li\u003e\n\u003cli\u003e06016158-1 (1 speed) Caldera)\u003c\/li\u003e\n\u003cli\u003eWavemaster 37334 (Power Right) \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Aqua Flo by Gecko","offers":[{"title":"Default Title","offer_id":44012204982341,"sku":"06115000-1040","price":599.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/1134\/2405\/files\/XP2-Pump-Pool-and-HOt-Tub-Depot__86726.1631541160.600.600.jpg?v=1763588781"},{"product_id":"pump-adapter-converts-1-1-2-intake-discharge-to-2","title":"Pump Adapter - Converts 1-1\/2\" Intake\/Discharge to 2\"","description":"\u003cp\u003eThread on adaptor for Aqua-Flo, Waterway and Balboa brand hot tub pumps, threads onto the 1-1\/2\" (Actual 2-3\/8\" OD) intake or discharge and converts the threads to standard 2\" pump threads (actual 3\" OD).\u003c\/p\u003e\n\n\u003cp\u003eDetails:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAqua-Flo part number 50100120\u003c\/li\u003e\n\u003cli\u003eThis adapter is used on Aqua-Flo pumps to convert a 1-1\/2\" intake or discharge to 2\"\u003c\/li\u003e\n\u003cli\u003eActual measurements: 3\" outside diameter, 2-5\/8\" inside diameter\u003c\/li\u003e\n\u003cli\u003eIncludes one 2\" O-ring (not pictured, part number 805-0226)\u003c\/li\u003e\n\u003cli\u003eColour: White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e picture is to illustrate front and back of one adaptor, price is for one\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eProduct note:\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"color: #0000ff;\"\u003eDoes not fit on any inflatable spas or Intex \/ Bestway soft sided pools and pumps as they have Chinese metric size components.\u003c\/span\u003e\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":44012286214213,"sku":"50100120-K","price":12.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/1134\/2405\/files\/50100120__37466.1612293899.600.600.jpg?v=1763590553"},{"product_id":"aqua-flo-xp2-1-5hp-hot-tub-pump-115v-2x-2","title":"Aqua-Flo XP2 1.5HP Hot Tub Pump 115V, 2\"x 2\"","description":"\u003cp\u003eAqua-Flo by Gecko XP2 hot tub pump for 120 volt applications. Features a 2 speed 48 frame motor rated at 10.5 amps for high speed. Standard 2\" (Measures 3\" OD) intake and discharge threaded connections.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eXP2 Flo Master Series \u003c\/li\u003e\n\u003cli\u003e1.5HP, OP.HP 1.0*\u003c\/li\u003e\n\u003cli\u003eHi-Flow GPM 100\u003c\/li\u003e\n\u003cli\u003e10.5 amps high\u003c\/li\u003e\n\u003cli\u003e3.2 amps low\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"color: #ff0000;\"\u003e120 Volts\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e2\" intake and discharge (Measures 3\" OD across)\u003c\/li\u003e\n\u003cli\u003eUnions with o-rings included\u003c\/li\u003e\n\u003cli\u003e48 frame motor\u003c\/li\u003e\n\u003cli\u003eDual speed\u003c\/li\u003e\n\u003cli\u003eCord not included\u003c\/li\u003e\n\u003cli\u003eCan be used as a replacement for the Wavemaster 6000 used in the Hot Spot SX 115V hot tubs made by Watkins \/ Hot Springs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*OP.HP denotes operational horse power and is a notation specific to Aqua-flo by Gecko brand hot tub pumps. \u003c\/p\u003e","brand":"Aqua Flo by Gecko","offers":[{"title":"Default Title","offer_id":44012286541893,"sku":"06610006-2040","price":569.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/1134\/2405\/files\/XP2-Pump-Pool-and-HOt-Tub-Depot__93060.1643131672.600.600.jpg?v=1763590567"},{"product_id":"solid-hot-tub-pump-base-1-2-thick","title":"Solid Hot Tub Pump Base, 1\/2\" Thick","description":"\u003cp\u003eSolid base, 1\/2\" thick for 48 frame and 56 frame hot tub pumps. This base is typically used if your spa pump has the discharge rotated to the right bottom to raise the pump 1\/2\" as the discharge threads are below the motor base in that position.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":44012459884613,"sku":"672-1030","price":10.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/1134\/2405\/files\/672-1030__28715.1651165018.600.600.jpg?v=1763595950"},{"product_id":"3-8-pump-hose-barb-adaptor","title":"3\/8\" Pump Hose Barb Adaptor","description":"\u003cp\u003eThe hot tub pump drain plug barbed hose adaptor fits most new Waterway pump wet ends to attach a 3\/8\" clear hose to the face. Some manufacturers glue the fittings into place so they cannot be transferred when replacing the pump. If this is the case, purchase new barb fitting(s) as required for the configuration of your spa.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDetails:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWaterway part number 413-1201\u003c\/li\u003e\n\u003cli\u003eBarb Fitting, 3\/8in. Barb x 1\/4in. NPSM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWaterway Executive 48 and 56 Series Pumps (made in 2025 and later)\u003c\/li\u003e\n\u003cli\u003eWaterway Viper Pumps (made in 2025 and later)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote: Waterway has changed the threads slightly for 2025 and newer models. This barb does NOT fit:\u003c\/strong\u003e Waterway Iron Might pumps (any year), Waterway Executive 48 and 56 Series pumps made prior to 2025, Balboa, Aqua-flo or LX brand pump wet ends. For these pumps please use part \u003ca href=\"%%GLOBAL_ShopPathSSL%%\/pump-drain-plug-hose-barb-adaptor\/\" target=\"_blank\" rel=\"noopener\"\u003e672-4350\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant.\u003c\/strong\u003e \u003cbr\u003eDo not to over-tighten, barb fittings will break off at the threads if too much force is applied as the material is softer than what the wet end is made of.\u003c\/p\u003e","brand":"Waterway","offers":[{"title":"Default Title","offer_id":44013019234373,"sku":"413-1201","price":6.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/1134\/2405\/files\/413-1201__63064.1754512735.600.600.jpg?v=1763599694"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0686\/1134\/2405\/collections\/aqf-g__46909_048653f0-4189-44b3-b29b-5ece0dc62e59.png?v=1763584077","url":"https:\/\/poolandhottubdepot.myshopify.com\/collections\/flo-master-xp2.oembed","provider":"Pool \u0026 Hot Tub Depot","version":"1.0","type":"link"}